Search Results

Bavarian Brewery Technologies stainless steel brewery serving/brite tank, Vessel Type SW7. 7.8 BBL gross volume with 7 BBL net capacity, approximately 217-gallon working capacity. Maximum working pressure 14.8 PSI; test pressure 45 PSI. Serial No. 0790. Manufactured 2012 in Hungary by BBT. Vertical four-leg stainless steel vessel equipped with pressure gauge, graduated exterior level tube, sanitary fittings and butterfly valves.

Bavarian Brewery Technologies stainless steel brewery serving/storage tank, Vessel Type SW7. 7.8 BBL gross volume, 7 BBL net volume (approximately 217-gallon working capacity). Maximum working pressure 14.8 PSI, test pressure 45 PSI. Serial No. 0791. Manufactured 2012 in Hungary by BBT. Vertical leg-mounted vessel with sanitary fittings, valves, pressure gauge and exterior level tube. 

EST 40 BBL-Commercial stainless steel cylindroconical brewery fermentation tank with conical bottom, side access manway, sanitary valves and fittings, pressure gauge, temperature/control instrumentation, bottom dump and associated piping. Jacketed construction for temperature control. Previously used in commercial brewery operations. Exact capacity, manufacturer and pressure rating not known. 

Stainless steel conical fermenter marked NANCY with side access port, gauge, valves, fittings, support legs and lower discharge assembly. 

Stainless steel conical fermenter marked Gizmo with side access port, gauge, valves, fittings, support legs and lower discharge assembly. As pictured, please review photos for condition.

Stainless steel conical fermenter marked DEMI with side access port, gauge, valves, fittings, support legs and lower discharge assembly. As pictured, please review photos for condition.

Stainless steel brewery brite/conditioning tank, approximately 15 BBL capacity based on physical size and configuration. Features side access manway, pressure gauge/plumbing, sanitary fittings and lower product outlet. Previously used in commercial brewery operations. No manufacturer data plate located. Capacity and pressure rating are not able to be verified. 

Stainless steel brewery brite/conditioning tank, approximately 15 BBL capacity based on physical size and configuration. Features side access manway, pressure gauge/plumbing, sanitary fittings and lower product outlet. Previously used in commercial brewery operations. No manufacturer data plate located. Capacity and pressure rating are not able to be verified. 

Stainless steel brewery brite/conditioning tank, approximately 15 BBL capacity based on physical size and configuration. Features side access manway, pressure gauge/plumbing, sanitary fittings and lower product outlet. Previously used in commercial brewery operations. No manufacturer data plate located. Capacity and pressure rating are not able to be verified. 

Stainless steel brewery brite/conditioning tank, approximately 15 BBL capacity based on physical size and configuration. Features side access manway, pressure gauge/plumbing, sanitary fittings and lower product outlet. Previously used in commercial brewery operations. No manufacturer data plate located. Capacity and pressure rating are not able to be verified. 

Stainless steel brewery brite/conditioning tank, approximately 15 BBL capacity based on physical size and configuration. Features side access manway, pressure gauge/plumbing, sanitary fittings and lower product outlet. Previously used in commercial brewery operations. No manufacturer data plate located. Capacity and pressure rating are not able to be verified. 

Stainless steel brewery brite/conditioning tank, approximately 15 BBL capacity based on physical size and configuration. Features side access manway, pressure gauge/plumbing, sanitary fittings and lower product outlet. Previously used in commercial brewery operations. No manufacturer data plate located. Capacity and pressure rating are not able to be verified. 

Commercial stainless steel brewery process/conditioning tank, approximately 30 BBL capacity based on physical size and configuration. Features large side access manway, multiple sanitary ports and fittings, bottom outlet and associated exterior piping. Jacketed stainless steel construction. Previously used in commercial brewery operations. No manufacturer data plate located. Exact capacity, pressure rating and intended process application are not able to be verified. 

Three vessel-wide mash/lauter tun, brew kettle, whirlpool, with base purchase price of $85,473.00. Unitronix color vision 12.1 inch screen-$7,500.00 purchase price, SEW Eurodrive motors (standard on Alpha brewhouse units), 304 stainless steel work platform, stairs and railing with polished SS finish sanitary exterior, heat exchanger, bottom mash out option. Purchase agreement dated September 1, 2017 and is available for review by calling 303-934-8322 or emailing customerservice@dickensheet.com. 

INSPECTION: Please call 303-934-8322 to schedule an appointment. STAGGERED ONLINE BIDDING ENDS: Thursday, October 8th 2:00 PM MT REMOVAL: By appointment-Monday-Friday 9:00 AM - 4:00 PM MT no later than one week following the conclusion of the auction.

Commercial 3.2m³ Double-Door Vacuum Autoclave + Gas Steam Generator + 8 Trolleys — Complete Sterilization System (Never installed, U.S. voltage) What's Included 1. Satrise High-Pressure Steam Autoclave Sterilizer      ● Inner chamber dimensions: 220cm × 105cm × 138cm (L×W×H)      ● Capacity: 3.2 cubic meters (~113 cu ft)      ● Weight: approx. 4,000 kg (~8,800 lbs)      ● Operating pressure: 0.4–0.6 MPa      ● Working temperature: 127–134°C (260–273°F)      ● Double-door pass-through design      ● Vacuum function with vacuum pump (pre-vac air removal for complete sterilization)      ● Already modified for US power: 480V, 60Hz, 3-phase / 110V, 60Hz, 1-phase      ● CE Certification included ● Unit is not ASME certified 2. Natural Gas Steam Generator (0.3 t/h)      ● Type: Natural gas fired      ● Rated evaporation: 0.3 tons/hour      ● Working pressure: 0.09 MPa      ● Steam temperature: 112°C      ● Fuel consumption: 12–18 m³/h natural gas      ● Designed to pair directly with the autoclave ● Unit is not ASME certified 3. Stainless Steel Sterilization Trolleys (×8)      ● Dimensions: 1m × 0.5m, 4 layers, 50cm layer height      ● 304 stainless steel construction      ● Assemblable / knock-down design      ● Sized to load directly into the autoclave chamber 4. Documentation & Support      ● CE certification documents      ● Installation manuals and instructions      ● Original proforma invoice      ● Direct line to Satrise factory for remote installation support and technical guidance   Condition      ● Never installed, never operated      ● Uncrated from shipping but still in steel frame transport housing      ● Stored indoors in a climate-controlled facility since 2021      ● No cosmetic damage, rust, or wear      ● Essentially new-old-stock condition   Ideal Applications      ● Commercial mushroom cultivation (substrate & grain sterilization)      ● Pharmaceutical / botanical manufacturing      ● Food processing & canning      ● Laboratory / research sterilization  

1000 lb. Units sells for over $1,000.00 new.

Approximately 8 foot

Stand not included. The GE AKTA Prime Plus is a flexible chromatography system that performs single-step purifications of tagged and untagged proteins as well as antibodies.  The GE AKTA Prime Plus FPLC System is flexible for more general purification tasks, such as ion exchange, affinity chromatography, buffer exchange, HIC, and gel filtration.

SPEX SamplePrep 6875D Large Freezer/Mill is a top choice for labs requiring efficient sample preparation. This model combines the benefits of a large capacity freezer and a powerful mill, ideal for grinding tough materials like tissue samples or plastics. Applications include forensic analysis, pharmaceutical development, and material science research. Key Features & Benefits: Large capacity freezer for sample chilling Powerful mill for efficient sample grinding Two separate chambers eliminate cross-contamination Touchscreen interface for easy operation   Specifications: Freezer chamber dimensions: 12″ x 8″ x 6″ (30.5 cm x 20.3 cm x 15.2 cm) Mill chamber dimensions: 10″ x 6″ x 4″ (25.4 cm x 15.2 cm x 10.2 cm) Freezer temperature range: -40°F to ambient Mill speed: 600 to 1800 rpm

Table & glass enclosure not included. The JASCO SFC-4000 Series Supercritical Fluid Chromatography System is an advanced, modular chromatographic platform optimized for both chiral and achiral separations using supercritical carbon dioxide . [1, 2] INFO OBTAINED ONLINE FOR REVIEW:  Key System Features Dynamic Back-Pressure Regulator : The high-speed BP-4340 regulator maintains precise and constant system pressure. Flexible Configurations : Available in analytical (SFC-4000), semi-preparative (SP-4000), and preparative (PR-4088) scales. Wide Detector Choice : Supports UV-visible, Photometric Diode Array (PDA), fluorescence, circular dichroism (CD-4095), and mass spectrometry compatibility. Dual HPLC/SFC Operation : Can switch into a standard HPLC setup by turning off cooling and the back-pressure regulator. [1, 2, 3, 4] Environmental and Operational Benefits Green Chemistry : Uses carbon dioxide combined with safe organic modifiers like alcohol, reducing toxic waste. High Efficiency : Features low viscosity and high diffusivity for rapid column equilibration and fast separations. [1, 2]

Super-insulated container designed for the safe storage and dispensing of liquid nitrogen in laboratories and medical facilities. 

SC250XP SPEEDVAC CONCENTRATOR The Thermo Savant SC250EXP SpeedVac concentrator has a high-capacity and is designed for use with aqueous and organic solvents. The SC250EXP includes four IR heat lamps for drying high-boiling point solvents such as DMSO and DMF. Specifications: Includes model UPR-4A microplate rotor Temperature range: 45°C to 80°C 90-day warranty The system features dual vacuum control of “RAMP” and “LEVEL”, which eliminates samples from bumping and freezing. The chamber, vapor path, and pump are all chemical resistant. The heated glass lid reduces drying time and prevents condensation.

Modular Chromatography Setup  

ON BEHALF OF SECURED CREDITOR, COLORADO DEPARTMENT OF REVENUE, ESTATES AND OTHERS INSPECTION: Friday, October 2nd 10:00 AM - 12:00 PM MT STAGGERED ONLINE BIDDING ENDS: Friday, October 2nd 2:00 PM MT PAYMENT DEADLINE: Monday, October 5th no later than 5:00 PM MT REMOVAL: Monday, October 5th or Tuesday, October 6th 9:00 AM - 5:00 PM MT ADDRESS: 1501 W Wesley Avenue, Denver, CO 80223 10% buyer's premium on all lots.